Our 12V 135Ah lead-acid battery is the power solution you can always rely on. With rugged ABS casing, durable copper terminals, and excellent discharge performance, it’s engineered to perform in tough conditions. From industrial floor scrubbers and aerial platforms to mobility scooters and electric rickshaws, this battery keeps machines running smoothly around the world. It offers great temperature resilience, long cycle life, and easy installation, making it a smart choice for both businesses and everyday users. Dependable, efficient, and cost-effective—this battery delivers steady energy when and where you need it most.
| Parameters | Specification |
|---|---|
| Voltage (V) | 12V |
| 3hr Capacity (Ah) | 135 |
| Dimensions (mm) (L × W × H × T/H) | 338 × 172 × 280 × 280 |
| Weight (Kg) | 45.0 |
| Material of Shell | ABS |
| Max Resistance (mΩ) | 4.0 |
| Terminal | Copper, M8 × 20 screw |
| Discharge Capacity (3hr) | 40°C: 105% / 25°C: 100% / 0°C: 90% / -20°C: 70% |
| Capacity ≥ (Ah, 25°C) | 20hr: 165 / 10hr: 150 / 3hr: 145 / 2hr: 135 |
| Open-Circuit Voltage (V) | 13.0 ~ 13.4 |
| Charging Voltage (V) | Floating: 13.8 / Cycling: 14.7 |
| Max Discharge Current (A) | 720 |
| Max Charge Current (A) | 135 |
| Residual Capacity After Self-Discharge | 30d: 90% / 60d: 85% / 90d: 82% / 180d: 80% |
| Hour Rate | Capacity (Ah) |
|---|---|
| 20hr | 165 |
| 10hr | 150 |
| 3hr | 145 |
| 2hr | 135 |
| Country | Brand | Machine/Model |
|---|---|---|
| Germany | Hako | Scrubmaster B45 |
| Germany | Kärcher | B 80 W Bp |
| Denmark | Nilfisk | SC800 |
| Italy | Comac | C85 |
| Italy | Fimap | Magna 75 |
| United Kingdom | Numatic | TTB 6055/100T |
| France | Tennant | T300e |
| Spain | TASKI | Swingo 1250 |
| Netherlands | Genie | GS-1932 |
| Poland | IPC Gansow | CT 70 |
| United States | Tennant | T7 |
| United States | JLG | 20MVL |
| United States | Advance (Nilfisk) | SC750 |
| Canada | Nobles | SpeedScrub 5700 |
| Mexico | Tennant | 5680 |
| Brazil | Kärcher | B 60 W Bp |
| India | YC Electric | Yatri Deluxe (E-Rickshaw) |
| India | Atul Auto | Elite Plus (Lead Acid) |
| Thailand | Hako | Scrubmaster B70 |
| Malaysia | Nilfisk | SC500 |
Charge Regularly, Don’t Wait Too Long
Try not to run your battery all the way down before charging. Keeping it above 30–40% helps prevent deep discharge, which can shorten lifespan.
Use the Right Charger
Always match your charger to the battery type and voltage. A quality charger with automatic cut-off or pulse technology keeps the battery healthier.
Avoid Overcharging
Leaving the battery on charge for too long can cause overheating and water loss. Use a charger with float or smart charging mode to stop at the right time.
Keep It Cool, But Not Freezing
Extreme heat speeds up chemical aging, while freezing cold reduces capacity. Store and operate your battery in moderate temperatures whenever possible.
Check Terminals Regularly
Clean the terminals to avoid corrosion. A quick wipe with a dry cloth or a brush helps maintain a strong connection.
Tight Installation Matters
Secure the battery firmly in place. Excessive vibration can damage the plates inside and shorten battery life.
Give It a Full Charge After Storage
If your battery hasn’t been used for a while, give it a full recharge before putting it back to work. This restores performance and prevents sulfation.
Avoid Short, Frequent Charging
Partial and too-frequent charging cycles can stress the battery. Let it reach a good depth of discharge before recharging (but not too low!).
Keep It Clean & Dry
Dirt and moisture on the case can lead to self-discharge. Wipe the outer shell to keep it clean and safe.
Plan Regular Maintenance
For long-term use, check voltage and capacity every few months. A little attention goes a long way in extending battery life.
🔍 Check the Battery: Make sure the battery is free from cracks, leaks, or damage.
📦 Unpack Carefully: Handle with care; it’s heavy (about 45kg). Always lift with both hands or use lifting equipment.
⚡ Safety First: Wear gloves and safety glasses when handling. Keep away from sparks, fire, and open flames.
Prepare the Compartment
Ensure the battery area is clean, dry, and secure.
Remove any dust, oil, or old corrosion.
Position the Battery
Place the battery upright and secure it firmly to avoid vibrations during use.
Do not tilt or invert the battery.
Connect the Cables
Connect the positive (+) cable first.
Then connect the negative (–) cable.
Tighten screws (M8×20) securely but do not overtighten.
Check the Connections
Ensure cables are firmly attached and not loose.
Apply a thin layer of anti-corrosion grease if available.
🔌 First Charge: Fully charge the battery before using it for the first time.
🌡 Charging Voltage:
Floating: 13.8V
Cycling: 14.7V
⏱ Avoid Overcharging: Use a smart charger with automatic cut-off.
❄️ Temperature Tips: Charge in a well-ventilated, cool environment. Avoid direct sunlight or freezing conditions.
✅ Recharge the battery after each use or when voltage drops.
✅ Avoid deep discharge (don’t run it completely empty).
✅ Keep the outer surface and terminals clean and dry.
✅ Secure the battery firmly to reduce shock and vibration.
Store in a cool, dry place.
Recharge every 2–3 months if not in use.
Do not leave the battery in a discharged state for a long time.
Do not short-circuit the terminals.
Keep away from children and pets.
In case of acid leakage, rinse immediately with clean water and seek medical advice if it contacts skin or eyes.
12‑month limited warranty against manufacturing defects. Technical support available for installation and charging best practices.
Power You Can Count On – 12V 135Ah Lead-Acid Battery for Everyday Machines
One year from the date of shipment
Tell us your application, voltage/capacity, target quantity, and delivery terms. Our team will reply within 24 hours.
